W-DMX TX-RX: Wireless DMX Receiving Unit

W-DMX RX - TX - DONGLE - [27.11. 2024]
Predám set W-DMX 3x RX - 1x TX + Splitter OST-3 od SRS Light Design, v 100% stave, ako nové, + 4ks 12dB ANT, a W-DMX CO-EXISTENCE DONGLE, s prístupom k presetom Wireless Solution (G4S a G5), jasné aj kufrík. Cena komplet je 750,-eur.

W-DMX Transmitting & Receiving unit is a part of the new generation wireless DMX system which employs the W-DMX technology. W-DMX Receiver is a compact, plug-and-play device that is easy to set up and use. W-DMX system represents a true innovation in comparison with other wireless DMX systems because it employs the adaptive FHSS standard instead of the commonly used W-LAN standard. The W-LAN standard uses fixed channels without hopping causing a much bigger risk for interference from other competing local wireless networks. However, the FHSS standard uses 83 discrete frequency channels, checking for interference free transmission every millisecond.

DMX input USITT DMX 512 (1990) * high voltage protection (peak power 600W, 10/1000us) Compliance declarations: ETSI: EN300 328 & 300 826, EMC: EN301 489-17, CE: EN60950, FCC: UQT-WDXOEMPCBF. Power supply 230V/50Hz or 84-256V 50/60Hz. Housing & Dimensions Steel housing with powder coating 93 x 123 x 45 mm, 1kg
XLR 3-/5-pin connector (Neutrik®) Pin 1 GND, Pin 2 Data - Pin 3 Data + Pin 4, 5 Not connected

Operation
To search the W-DMX Receivers in the system, shortly press the function button on the transmitter. The transmitter’s LED will start flashing in red/green color rapidly scanning for new free receivers. When a receiver logs onto the transmitter, the LINK green light will start to flash rapidly in the same way as the transmitter. After approximately 10 seconds the transmitter will jump back to normal mode and continue ransmitting data. The receivers will now try to synchronize with the transmitter.
When synchronized to the transmitter:
• No DMX signal is connected, the W-DMX transmitter flashes red/green; LINK green light on the receiver is ON and the DATA green light is OFF. To log the receiver off from the transmitter, simply press the function button on it for approximately 5 seconds; when logged off, the LINK green light will be off, meaning login onto a new transmitter is available.
• DMX signal is connected, the W-DMX transmitter LED is green – standard operation
Logging off all receivers currently logged onto the transmitter: Press and hold the function button on the transmitter for about 5 seconds. When the receivers’ LINK green
lights are off, all the receivers are logged out. Point/Multipoint operation:
• Point to point operation: In this mode, one W-DMX transmitter (W-DMX TX) is communicating with one W-DMX receiver (W-DMX RX).